Paint the door with at least two coats of exterior satin or semi gloss paint following the same process you did for the primer and.
Best paint for a metal exterior door.
Pour the paint into a tray.
When painting metal always use exterior latex paint.
If painting light to moderately used indoor metal surfaces think wall sconces bed frames or guest room night tables go with water based acrylic paint a cheaper 15 to 40 per gallon.
Remove the hardware from the door and place it somewhere safe.
Then apply 2 coats of the primer letting it dry after each coat.
If your door is paneled start with the panels.
Steps for painting a door.
Lightly sand the door with 400 grit sandpaper.
Using semigloss exterior paint and a 2 inch angled sash brush with synthetic bristles paint around the edges of the.
Paint a section at a time.
Use the vacuum with the dust attachment to clean off the door then wipe it down with a wet rag.
If the finish is free of cracking and peeling but simply needs a fresh coat the surface can be lightly sanded and cleaned and a fresh coat of glidden premium exterior paint can be applied.
Preparing the door for a fresh coat of paint if your door has old paint on it what you do will depend on the condition of the paint.
This means that when you use latex paint the paint will move with the door when it expands and compresses in warm and cold weather.
If painting the door exterior only also paint the hinged edge of the door.
The interior color of the door should match the latch edge.
Add two coats of paint letting each dry completely.
Before you apply the primer and paint lightly sand the door with 400 grit sandpaper so the primer and paint will stick to it better.
Remove the door from its hinge pins with the hammer and place it on the sawhorses.
Latex paint is acrylic paint mixed with a binding agent that completely covers the surface staying with it no matter what.
Follow this order for best results when using snapdry paint on your doors.